Thingiverse

Stryfe Wire Channel (with and without Volt Meter Mount)

by Meishel

255 Downloads

143 Likes

1 Makes

Download Model

This is an upgraded wire channel for the Nerf Stryfe. It adds 5mm of space for wire so you can fit 16awg wire and volt meter wire. There are 2 versions of this design, with Volt Meter mount and without, so you can use 16awg wire without having the volt meter mount in the way if you're rather go that route. It was designed to take M2 *6mm screws and this voltage meter: http://foamblastshop.com/product/volt-meter/ Wire from voltage meter is long enough to reach the jam door switch. Make sure

Source

Thingiverse

Comments

Makes