Thingiverse
Y Axis Belt tensioner
by Nando7789
4
Downloads
1
Likes
0
Makes
This is a Y-Axis Belt tensioner for the prusa I3 rework. It has 4 M3x40mm in my case but you can use larger (more longer makes a minor travel distance of the axis).
For a perfect tension i also used a holder that can resist the tension(https://www.thingiverse.com/thing:745934).
Step for a good tension:
1.- Put the belt in the holder and around the motor and the bearing (608zz already put in the M8 bolt to the part of the thing.
2.- Put the M3 bolts to the nut of the other part and tensi
For a perfect tension i also used a holder that can resist the tension(https://www.thingiverse.com/thing:745934).
Step for a good tension:
1.- Put the belt in the holder and around the motor and the bearing (608zz already put in the M8 bolt to the part of the thing.
2.- Put the M3 bolts to the nut of the other part and tensi
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in