Thingiverse
Derailleur Hanger Alignment Tool
by Warrengrice
104
Downloads
70
Likes
0
Makes
Parts Required:
1. Old Hub Axle or M10x1.0 Thread Bar
2. Old Quick Release Skewer
3. 2x M10x1.0 Lock Nut
4. 20x20mm Mild Steel Box Section
5. 2x O-rings
6. 1x M4 Screw (Not really necessary)
Tools Required:
1. Hack Saw
2. Drill
3. Assorted Drill Bits
4. Step Drill Bit (14mm)
5. M4 Tap (if using M4 screw)
If you are having shifting issues it could be due to a bent derailleur hanger. This tool allows you to determine if your hanger is straight and realign it if necessary. Your
1. Old Hub Axle or M10x1.0 Thread Bar
2. Old Quick Release Skewer
3. 2x M10x1.0 Lock Nut
4. 20x20mm Mild Steel Box Section
5. 2x O-rings
6. 1x M4 Screw (Not really necessary)
Tools Required:
1. Hack Saw
2. Drill
3. Assorted Drill Bits
4. Step Drill Bit (14mm)
5. M4 Tap (if using M4 screw)
If you are having shifting issues it could be due to a bent derailleur hanger. This tool allows you to determine if your hanger is straight and realign it if necessary. Your
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in