Thingiverse
X-Belt Tensioner for Anycubic Prusa i3 - no unwanted Z-axis loading!
by Quas7
49
Downloads
27
Likes
0
Makes
This model is also featured by Anycubic3d: http://www.anycubic3d.com/model/show/1255.html
This is a simple and effective X-belt tensioner to get rid of tensioning springs on the belt WITHOUT loading the z-axis perpendicular to the vertical rails (sideways).
The counterforce is directly supplied by the x-axis rails and not by the z-axis rails, like in many other cases, as the M4 bolts are placed on the faces of the two metal x-axis rails.
additionally needed:
2 M4 nuts
2 M4 bolts (>20
This is a simple and effective X-belt tensioner to get rid of tensioning springs on the belt WITHOUT loading the z-axis perpendicular to the vertical rails (sideways).
The counterforce is directly supplied by the x-axis rails and not by the z-axis rails, like in many other cases, as the M4 bolts are placed on the faces of the two metal x-axis rails.
additionally needed:
2 M4 nuts
2 M4 bolts (>20
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in