Internal and External Dimension Test

This is an ABS shrink test.

Each of the internal dimension test STLs are a 10mm tall strip with 10 holes of increasing size (1mm increase). The provided STLs go from 1 to 10mm, 11 to 20mm, 21 to 30mm, 31 to 40mm, and 41 to 50mm.

The external dimension test STL is a 10mm thick piece with dimensions from 2mm to 30mm by 2mm steps. Each step is 4mm to accommodate the width of caliper for measurement.

My conclusion from doing this is that with current slicers, the smaller than internal featu