Thingiverse
FPV Ground Station Build Plate
2
Downloads
3
Likes
0
Makes
Base to hold my FPV Diversity Receiver and DC to DC Buck converter.
What's going on here?
XT60 (connected to 3s battery) plugs into the input of the buck converter, and is also feeding the receiver (why there's 2 set's of wires on the input side of the buck converter)
Output of the buck converter is attached to the DVR (adjusted to 5.0 volts prior)
Video output from the receiver, RCA cord was cut, shielding was soldered back together, the core coming out of the receiver is soldered to
What's going on here?
XT60 (connected to 3s battery) plugs into the input of the buck converter, and is also feeding the receiver (why there's 2 set's of wires on the input side of the buck converter)
Output of the buck converter is attached to the DVR (adjusted to 5.0 volts prior)
Video output from the receiver, RCA cord was cut, shielding was soldered back together, the core coming out of the receiver is soldered to
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in