NEMA 23 5to1 gear drive

Upscaled a Nema17 design 1.3333% all axis
Untested..don't have a NEMA 23 motor to try it on
Scaled the bearings up too, 4x9.31x4 or 4x9x4 bearing (tight fit), which equates to 684ZZ
Bore Dia (d) 4 mm
Outer Dia (D) 9mm
Width (B) 4mm

Anyone wish to give this a go
Nema 17 max size is 42.3 square, Nema 23 is 56.4, rounded down is 42 to 56 in scale

Someone willing to test this out?

Was informed the print worked but the hole positions are in the incorrect locations...
"42mm and it would have to be 47mm"