Led Arc Lamp

I saw the Led Bridge Lamp by OPOSSUMS (https://www.thingiverse.com/thing:1639224) and I wanted to print it but it was huge an I simply wanted to make my own... So here it is :)


Information
=========

You'll need 15 Segments and both feet.

Printing time was about 3 hours per segment and 4 hours per foot which makes a total of about 53hours....

The bow has a diameter of about 1 meter.

You can attach 3 LED-strips:
-2 in the inner side (facing towards the desk)
-1 inside th