Thingiverse
smaller anet A8 y-belt-holder - 1.4mm belt thickness
by JackTheQuila
38
Downloads
21
Likes
0
Makes
I got myself a bigger heatbed (300 x 200) for my anet a8 and also redesigned the y-axis.
Most designs for the Y-axis holder need a lot of space and I cut it down a little, so it fits between the threaded rods of this ( https://www.thingiverse.com/thing:2477814 ).
V1: Had a brain fart here and thought the opening has to be 2x1.4mm. I forgot that the teeth are counted only once. So this should fit for belts that measure 2.8mm when taken double.
V2: Is for my 1.4mm thick belt which is 2.4m
Most designs for the Y-axis holder need a lot of space and I cut it down a little, so it fits between the threaded rods of this ( https://www.thingiverse.com/thing:2477814 ).
V1: Had a brain fart here and thought the opening has to be 2x1.4mm. I forgot that the teeth are counted only once. So this should fit for belts that measure 2.8mm when taken double.
V2: Is for my 1.4mm thick belt which is 2.4m
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in