Filament storage dry box

I know there are many other versions of this project out there, but I thought I'd still share mine. I used a Ziploc 60 qt. Weathershield box. I printed the two supports for the inside and outside of each side of the box. I used #6 - 32 x 3/4 inch machine screws. I also have a mini-dehumidifier in it to absorb moisture. The supports will fit a piece of 1-inch schedule 40 PVC pipe. I modeled it based on the that diameter and the PVC will snap in place.

I had the screws and PVC laying aro