Thingiverse
24mm Cherry MX Arcade Button
par Nibato
43
Téléchargements
32
Likes
0
Makes
This is a 24mm arcade button housing, nut, and cap using a cherry MX Switch.
The tolerances are a bit tight on the threads, 0.1mm layer height is a requirement, and the STL was mostly adjusted for my own 3D printer. You may have to play with your printer settings to get it to thread properly.
Wires will need to be soldered onto the Cherry MX switch itself.
The tolerances are a bit tight on the threads, 0.1mm layer height is a requirement, and the STL was mostly adjusted for my own 3D printer. You may have to play with your printer settings to get it to thread properly.
Wires will need to be soldered onto the Cherry MX switch itself.
Nibato publie également sur
3 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
