Makergear M2 Blower Bracket and Duct

This is a mod to replace the stock 50mm filament cooling fan on the Makergear M2 with a 50mmx15mm blower. This provides for improved airflow and a quieter print. Optionally you can add a brace to support the ductwork (see optional parts below). I found that his brace was not required as the duct has a snug fit against the blower. Locking nuts were selected to reduce the likelihood that vibrations would loosen the nuts.

Parts list:
1x 50x15mm blower (https://www.amazon.com/gp/product