LED Mount Assembly

I have several 4W LED [assemblies](https://www.superbrightleds.com/moreinfo/led-deck-lighting/led-eyelid-step-lights-deck-lights-4-watt/1626/3814/) I purchased for another project that is withering on the vine and thought I'd put a couple of the LEDs to use.

I wanted to mount the LED to the 2020 rail out of the way of the Kossel sliders on the verticals and have them about 2 cm above the print bed. Note the cool ball joint :)

These are the seconds project I've created on Fusion 360.