Thingiverse
Flying Bear Flyingbear P902 3D Printer Z Endstop Bracket
by noahlileger
42
Downloads
37
Likes
0
Makes
Flying Bear Flyingbear P902 3D Printer Z Endstop Bracket
This is a much needed improvement over the supplied 3D printed parts. Both the top and bottom of the brackets now register on metal surfaces so there can be no movement after calibrating your Z positioning.
Use #2x3/8" screws to clamp the shells together
(Alternative is M2.5x8mm)
The supplied M3 x 25mm screw and nut are recycled from the factory parts.
Enjoy!
This is a much needed improvement over the supplied 3D printed parts. Both the top and bottom of the brackets now register on metal surfaces so there can be no movement after calibrating your Z positioning.
Use #2x3/8" screws to clamp the shells together
(Alternative is M2.5x8mm)
The supplied M3 x 25mm screw and nut are recycled from the factory parts.
Enjoy!
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in