Thingiverse
Qidi Tech 1 Extruder Cable & PTFE Guide Tube Spacer
by leeph
76
Downloads
51
Likes
1
Makes
Redesigned parametrically, and from scratch in Autodesk Fusion 360
I have included three sizes. For the stock Qidi Tech 1, use the 48x26mm spacer.
If you are using my full replacement guide tube assembly (https://www.thingiverse.com/thing:2848195) then this brings the tubes closer together (34mm, the same distance as between the two nozzles - logical really!) then download the 34x26mm spacer for the rear, and optionally use the longer 34x42mm spacer for inside the hood, since (at least wit
I have included three sizes. For the stock Qidi Tech 1, use the 48x26mm spacer.
If you are using my full replacement guide tube assembly (https://www.thingiverse.com/thing:2848195) then this brings the tubes closer together (34mm, the same distance as between the two nozzles - logical really!) then download the 34x26mm spacer for the rear, and optionally use the longer 34x42mm spacer for inside the hood, since (at least wit
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in