Jar Lid

This was printed in: REAL-filament's Neutral PLA ø2.85.

Slicer: Cura

Placement of object in Cura:
Print the part with the top part on the bed so there will only be support on the outside and a little bit of support under the object.

Print Settings

Quality
Layer height: 0.2 mm.

Shell
Wall Thickness: 1.05 mm.
Top/Bottom THickness: 0.8 mm.

Infill
Infill Density: 30%.
Infill Pattern: Grid.
Infill Overlap percentage: 20%.
Skin Overlap percentage: 20%.

Speed
Print Speed