Thingiverse
Mini chuck
by Jori
123
Downloads
103
Likes
1
Makes
Mini chuck to be added to a electric drill.
3 independent clamping jaws, can clamp both inside and outside diameter.
Design source available here in onshape:
https://cad.onshape.com/document-redirect.html?d=/documents/2860d1fa8e992680392c3e86/w/b1bb7ba783ebfdde44098548
Step and stl files attached to this thing
Additional parts needed:
1Pc M5x20 Screw for center to attach to drill
3Pc M5x50 screws, one for each jaw
4Pc M5 nuts
3Pc Dia3x15 steel rods; I cut them down from an old DVD
3 independent clamping jaws, can clamp both inside and outside diameter.
Design source available here in onshape:
https://cad.onshape.com/document-redirect.html?d=/documents/2860d1fa8e992680392c3e86/w/b1bb7ba783ebfdde44098548
Step and stl files attached to this thing
Additional parts needed:
1Pc M5x20 Screw for center to attach to drill
3Pc M5x50 screws, one for each jaw
4Pc M5 nuts
3Pc Dia3x15 steel rods; I cut them down from an old DVD
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in