Thingiverse
Packer's Keychain
3
Downloads
3
Likes
0
Makes
Just a quick little design for a project/ gift for my dad.
-You'll need to print 2 bases (the rings) to close around the body (the G)
-You'll need 4 pegs to hold the bases together
-There's a margin of error of .5 mm between the holes in the base and the pegs, so it can be slightly loose so be aware of that.
-The part should be 1 to 1 in cms and is roughly 6 cms tall by 8 cms wide.
-If any scale is wrong with the .stl files do let me know as it's the first design, so errors are e
-You'll need to print 2 bases (the rings) to close around the body (the G)
-You'll need 4 pegs to hold the bases together
-There's a margin of error of .5 mm between the holes in the base and the pegs, so it can be slightly loose so be aware of that.
-The part should be 1 to 1 in cms and is roughly 6 cms tall by 8 cms wide.
-If any scale is wrong with the .stl files do let me know as it's the first design, so errors are e
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in