Thingiverse
NanoPi NEO Plus2 case
by gaddman
15
Downloads
10
Likes
1
Makes
Case for the [NanoPi Neo Plus2](http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2), with heatsink.
Can use either machine screws or self-tapping (3mm x 20mm or 4G x 3/4in) to assemble - the countersunk holes are 3mm dia and the holes to screw into are 2.5mm dia.
Printing should be set so that there are no gaps (high fill?), otherwise the screw supports can fail (see 4th photo).
The USB and SD card slots are hidden in this, but are designed with a thinner wall to allow cutting ou
Can use either machine screws or self-tapping (3mm x 20mm or 4G x 3/4in) to assemble - the countersunk holes are 3mm dia and the holes to screw into are 2.5mm dia.
Printing should be set so that there are no gaps (high fill?), otherwise the screw supports can fail (see 4th photo).
The USB and SD card slots are hidden in this, but are designed with a thinner wall to allow cutting ou
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in