Brackets for 0.5 inch PVC or CPVC Sched 40 or 80 pipe; or 12mm or 0.5 inch or 0.75 inch tube or rod

Makes handles, towel racks, etc.

Use with rod: 0.5 inch, 12mm or 0.75 inch; or 0.5inch PVC or CPVC pipe (either Schedule 40 or 80 should work).

Number 4 screws. Can use Number 5 screws for the 0.75 inch or the PVC/CPVC bracket.

Infill to how strong you need it to be. 30 percent a good starting point. Same with perimeters, tops, and bottoms - start with 3.

Prints with closed end of tube/pipe down.

Don't use PLA (PETG or ABS are good candidates) if this will be in wet, hot, or sunli