Thingiverse
5mm LED Socket for Cute Big LED Snowman (option)
by DataMouse
3
Downloads
2
Likes
0
Makes
Its not really a remix. Its an option for the Cute Big Snowman by Segeer.
This socket fits into the deck of the Snowman (using hot-glue).
The image shows the original deck by Segeer and in middle my LED socket.
Provides 3 holes for three 5mm-LEDs and inside is enougth room for the serial-resistor (220 ohms).
The holes are a little tight. Its thought to drill it up with a 5mm drill to fit the LEDs exactly.
All LEDs and the resistor is connected serial (note polarity!).
I used an old power supply with 12 volts and 200mA (note polarity, too).
The LEDs consumpts about 20mA.
This socket fits into the deck of the Snowman (using hot-glue).
The image shows the original deck by Segeer and in middle my LED socket.
Provides 3 holes for three 5mm-LEDs and inside is enougth room for the serial-resistor (220 ohms).
The holes are a little tight. Its thought to drill it up with a 5mm drill to fit the LEDs exactly.
All LEDs and the resistor is connected serial (note polarity!).
I used an old power supply with 12 volts and 200mA (note polarity, too).
The LEDs consumpts about 20mA.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
