Thingiverse
PTFE Filament Guide Prusa MK2 Multi Color for Enclosure
by Snafky
17
Downloads
11
Likes
0
Makes
I had a enclosure before i got the Multi Color addon.
Few issues I had to work around.
I had to rais the chamber and made some sideplate for the 3mm plexiglass (note! hight is not standard raisers height, check before you print)
I also had a problem with feeding the filament as best as possible to the Extruders.
This is my best way i have found so far.
If you have a better way please say so!!
Filament is feeded from the bottom (which makes loading a bit of a pain but i didn't want to
Few issues I had to work around.
I had to rais the chamber and made some sideplate for the 3mm plexiglass (note! hight is not standard raisers height, check before you print)
I also had a problem with feeding the filament as best as possible to the Extruders.
This is my best way i have found so far.
If you have a better way please say so!!
Filament is feeded from the bottom (which makes loading a bit of a pain but i didn't want to
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in