Thingiverse
RF100 better cable routing
by FunkyM
16
Downloads
12
Likes
0
Makes
It happens that the upper cable to the extruder breaks. What happened to me.
I ordered the replacement cable from the manufacturer and didn't want to install it in the same position again.
First I removed the old cable, that's a bit tricky but no problem.
I drilled a hole in the bottom right back of the cable with about 15mm-20mm and laid the cable in a nice big bend. The cable is held by my clip.
I hope the problem with the cable is solved.
Link to the cabel
https://www.conrad.de/de/
I ordered the replacement cable from the manufacturer and didn't want to install it in the same position again.
First I removed the old cable, that's a bit tricky but no problem.
I drilled a hole in the bottom right back of the cable with about 15mm-20mm and laid the cable in a nice big bend. The cable is held by my clip.
I hope the problem with the cable is solved.
Link to the cabel
https://www.conrad.de/de/
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in