Thingiverse
Automatic knife
by Shankman
139
Downloads
115
Likes
1
Makes
https://youtu.be/kANP4qNV07I
These should be printed in PLA for best results. PLA provides for rigidity
and a slippery surface that allows the blade to slide freely
top & bottom-2 perimeters 25% infill, 0.25mm layer
blade,catch and blade pin---3 perimeters 30% infill, 0.25mm layer
requires 3 short pieces of 3mm filament approx 15mm long
4 each M3 x 20 Socket head cap screw & nut.
not all rubber bands are created equal. the better ones to use
are the Plastibands, orthodonti
These should be printed in PLA for best results. PLA provides for rigidity
and a slippery surface that allows the blade to slide freely
top & bottom-2 perimeters 25% infill, 0.25mm layer
blade,catch and blade pin---3 perimeters 30% infill, 0.25mm layer
requires 3 short pieces of 3mm filament approx 15mm long
4 each M3 x 20 Socket head cap screw & nut.
not all rubber bands are created equal. the better ones to use
are the Plastibands, orthodonti
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in