Laser Cut Spool Mount

This is a simple laser cut filament spool holder. Any regular 750g or 1kg spool should fit just fine.

Files included (both .dwg and .dxf):
- Floor (you need one)
- Wall (you need two)
- Wall support (you need two)

You will also need 12 M3 screws and nuts. The length of the thread should be between 16mm and 20mm.

The thickness of the material must be 5mm. I personally used 5mm clear acrylic.

For the pipe that holds the spool, I used 16mm outer diameter PVC pipe. You can also 3D-pri