Thingiverse
Traxxas Summit FPV Anti-Vibration Rig
by LV-426
48
Downloads
28
Likes
0
Makes
Work in progress (Because I'm lazy YOU will need to rotate the STL's to print)
Fits Traxxas Summit or similar 1/10 - 1/8 scale RC
Print in ABS or PETG for strength at 0.2mm (mine were printed at 0.3mm for print speed)
Assembly is straight forward if you follow the pictures.
I have used other designs to either inspire or be included as part of the overall design and look of the finished product.
You will need to cut a relief in the shell for the PAN servo to fit.
Hot glue or M3 bolts can be
Fits Traxxas Summit or similar 1/10 - 1/8 scale RC
Print in ABS or PETG for strength at 0.2mm (mine were printed at 0.3mm for print speed)
Assembly is straight forward if you follow the pictures.
I have used other designs to either inspire or be included as part of the overall design and look of the finished product.
You will need to cut a relief in the shell for the PAN servo to fit.
Hot glue or M3 bolts can be
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in