Tevo Tarantula Case (acrylic covered)

Before you print!

I recommend PLA for this print.
Requirements: Acrylic sheets, 32(you can use less) M3 screws longer that 1cm with nuts.

Assembly
1 - Once printed position the parts as in the image.
2 - Cut out and from any material a bottom plate and attach it (this is important - it will hold all the parts together)
3 - Place the power supply in its position
4 - Place the mother board in its place and wire it up
5 - You can start attaching the side plates
6 - attach the screen to