Replicator Cover Hanger Bolt Spacers v2

A pair of spacers for drandolph's "3mm hood and cover" thingiverse.com/thing:23386

These pieces keep compression on both bolts holding the y-axis rods when hanging the front cover.

I found the original were too close together and printed as one piece (probably my HBP to nozzle height). They also weren't high enough. I enlarged the center hole by .35mm as well.

Inside diameter - 3.35mm
Outside diameter - 4.35mm
Height - 5.5mm
"Washer" - 8mm x .75mm

The height allows for about 1mm