Ultimaker original UMO(+) Feeder damper

Inspired by Frederik Brückners design (https://www.youmagine.com/designs/ultimaker-original-or-plus-feeder-damper) and the spring socket from ataraxis I designed this feeder damper.

Print Platte_Final.stl and Extruderdaempfer_Halter_Final.stl in PLA and Gummidaempfer_Extruder_Final.stl in flex material (I used Polymaker Polyflex).

Because of the inlayed plate the mounting is much more stronger. You can give the connection between feeder an damper a bit more stabilization if you insert 2 p