1/4 in. Female Brass Pipe T-Connector Wall Bracket

This is a bracket I designed to allow me to mount a Quick connect pneumatic connector in my workshop. The air hose was traveling to another area and this allowed me to mount a 1/4" Tee.

It's designed to use a Kreg 1-1/2" #2 Square drive screw. But as long as your screw head is 8mm or less and the shank of the screw is less than 3.5mm, you should be fine. The Kreg Screw # is SPS-F150.

The Tee I used is a Harbor Freight #68197.

I designed it to give you enough offset from the wall if yo