Yet another belt tensioner

Belt tensioner.
It will accept up to a 7.5mm width belt.

You will also need a 3mm screw and nut.

I printed at .2 mm layer height and 100% infill.

1) Insert the nut in the recess inside the body.
2) Thread a nut from the otherside through the nut.
3) Put the tensioner inside the body.
4) Thread belt through assembly.
Make sure the tensioner doesn't hit or interfere with anything.
5) Tighten screw to tighten belt.

This will way over tighten your belt if your not carefu