MP Mini Dial Indicator Mount Neoteck

Use to level the bed for MP select mini. This mount is for Neoteck indicator (https://www.amazon.com/gp/product/B01JYCVHLK/ref=od_aui_detailpages00?ie=UTF8&psc=1). These are the steps I used to level the bed (use figure below as a guide)

1) Put the extruder to home position (corner 1). Use a piece of paper to calibrate this corner.
2) Raise the extruder to about 2 inch in Z direction. Then move the extruder to the middle of the bed in x direction.
3) Mount the indicator at the calibrated co