Thingiverse
TronXY E3D v6 plus BLTouch plus 40mm Part Cooling Fan
by roycruse
100
Downloads
61
Likes
1
Makes
A mount for the E3D v6 plus the BLTouch plus a 40mm part cooling fan.
remixed from a couple of other things...
Note: this will move the hotend forward by about 15mm which does interfere with the travel limits of the y axis. You will loose about 10mm of print area at the back of the bed.
This is easily fixed by loosening the T nuts and sliding the vertical sections of the frame back by about 25mm (i moved it this far as i believe the design of the x3 the uprights are too far forward a
remixed from a couple of other things...
Note: this will move the hotend forward by about 15mm which does interfere with the travel limits of the y axis. You will loose about 10mm of print area at the back of the bed.
This is easily fixed by loosening the T nuts and sliding the vertical sections of the frame back by about 25mm (i moved it this far as i believe the design of the x3 the uprights are too far forward a
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in