Thingiverse
Mini Talon Pam Tilt Simple FPV gear
by joseserran
10
Downloads
10
Likes
0
Makes
You will need two servos (mg90s works fine https://goo.gl/AP6L15).
The tilt piece has been designed for HS1177 FPV cameras. You can coment below if you want another type of camera. If you own a HS1177 type camera you only need to unscrew up the back cover and screw it up directly to the printed tilt1 or tilt2. tilt1 is taller and tilt2 is shorter.
To secure the servor horns to the pam I suggest a little bit of hot glue.
For the axis join between tilt and pan you will need two M3 screws
The tilt piece has been designed for HS1177 FPV cameras. You can coment below if you want another type of camera. If you own a HS1177 type camera you only need to unscrew up the back cover and screw it up directly to the printed tilt1 or tilt2. tilt1 is taller and tilt2 is shorter.
To secure the servor horns to the pam I suggest a little bit of hot glue.
For the axis join between tilt and pan you will need two M3 screws
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in