4Inch TFT for Raspberry Pi 3

Ordered one of these from Wish for real cheap, but couldn't find a case for it. All sorts for 3.5" or 2.4" LCD's though. So over to Fusion 360 with my trusty calipers, and this is the (almost) final product. It "will" sit on top of a Pi, but at a slight angle. Pins on the Pi aren't quite long enough, or the connector on the LCD isn't. Take your pic.

Still need to add a type of clip or screws to hold this together, but for now, I just used a drop of superglue in the corners.