Thingiverse
Y motor bracket (Creality CR-10)
by noinkprint
50
Downloads
33
Likes
0
Makes
This is my design to install the damper on the back of the Y motor in order to keep him aligned.
The part is installed and align perfectly with the step motor.
To install this part together with the damper I used two new M3x40mm bolts between the damper and the step motor, and two M3x12mm bolts between the damper and the bracket.
I also used an M5 bolt with a half nut in order to fix the bracket to the frame of the printer.
This part is designed to print with no support.
I've used 7
The part is installed and align perfectly with the step motor.
To install this part together with the damper I used two new M3x40mm bolts between the damper and the step motor, and two M3x12mm bolts between the damper and the bracket.
I also used an M5 bolt with a half nut in order to fix the bracket to the frame of the printer.
This part is designed to print with no support.
I've used 7
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in