USB Hub Holder for IKEA ADILS Desk Leg

I made this slightly stylized bracket to hold a USB Hub to an IKEA ADILS desk leg or anything round with an approximately 1-5/8" diameter. I used 2x 6-32x3/4" machine screws and 2x 6-32 nuts (about $0.40 from my local Ace Hardware). It fits snug so you may not _need_ the bolt and nuts but I like things being extra snug.

I printed at 60% infill and 0.2mm layers and it worked well. No supports are needed. I tried 40% initially and it was a little flimsy with the hardware. The two separate files