Thingiverse
Pi Camera mount
by stmorgan
7
Downloads
1
Likes
0
Makes
A forward facing Pi camera mount. Snaps together with no fasteners, provides 4 3.6mm holes, sized for #6 sheetmetal screws.
The lens hole should be 2.5mm below the centerline of the part if you want to use it in a design. The screw holes are 23mm on center horizontally and 35mm on center vertically, the lens is 15mm up from the centerline of the lower screw holes, centered horizontally.
Final Update: The MKV version is the final iteration. I deem it perfect for my use. Other designs are su
The lens hole should be 2.5mm below the centerline of the part if you want to use it in a design. The screw holes are 23mm on center horizontally and 35mm on center vertically, the lens is 15mm up from the centerline of the lower screw holes, centered horizontally.
Final Update: The MKV version is the final iteration. I deem it perfect for my use. Other designs are su
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in