Thingiverse
Power supply cover for Flying Bear P905
by locnhinho
31
Downloads
22
Likes
0
Makes
This is a power supply cover for Flying Bear P905 with USB port of Raspberry PI, three XT60 connectors, and power cord plug.
The three XT60 connectors are make of 2 battery clamp XT60 holder (in the center) and a re-mix to include two side mount with the power supply cover. It requires two M3 screws with nut to clamp them all together. To mount this to the power supply cover, you will need two plastic 3mm screws.
The USB plug is designed to hold an iPhone 2A plug. To mount this to the powe
The three XT60 connectors are make of 2 battery clamp XT60 holder (in the center) and a re-mix to include two side mount with the power supply cover. It requires two M3 screws with nut to clamp them all together. To mount this to the power supply cover, you will need two plastic 3mm screws.
The USB plug is designed to hold an iPhone 2A plug. To mount this to the powe
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in