Thingiverse
Valentine Heart Nut and Bolt turntable 180mm x 180mm
by colinhaynes
2
Downloads
1
Likes
0
Makes
Large Valentines Heart nut and bolt for your nerd partner.
The heart is 180mm x 180mm and 10mm high. It has a bolt embedded into it which fits with the nut in this thing. The nut has a 1mm larger thread than the bolt to make sure it spins nicely, and is 40mm high and 100mm wide to its edges.
The nut fits flush onto the bolt so it all lays flat.
I created a heart from Tinkercad and downloaded that as an STL and resized it. Then I used the Nut_Job.scad from Mike Mattala's excellent Nut
The heart is 180mm x 180mm and 10mm high. It has a bolt embedded into it which fits with the nut in this thing. The nut has a 1mm larger thread than the bolt to make sure it spins nicely, and is 40mm high and 100mm wide to its edges.
The nut fits flush onto the bolt so it all lays flat.
I created a heart from Tinkercad and downloaded that as an STL and resized it. Then I used the Nut_Job.scad from Mike Mattala's excellent Nut
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in