Thingiverse
Wall bracket for IKEA Svärta loft bed
by ndupont
11
Downloads
11
Likes
0
Makes
Sleek wall bracket for the IKEA Svärta loft bed.
It will keep the frame 4cm from the wall and prevent any movement.
*See also the anti vibration pads : https://www.thingiverse.com/thing:2796540*
Print it flat on the bed for optimal resistance. Without brim or support, with 3 perimeters (1.2mm walls) and 1.2mm top/bottom surfaces. 20% tetrahedral infill.
The bracket can be printed with 0.32mm layers, and the grommet with a 0.1mm thickness.
Print a pair of each STL, use M3 20mm hex
It will keep the frame 4cm from the wall and prevent any movement.
*See also the anti vibration pads : https://www.thingiverse.com/thing:2796540*
Print it flat on the bed for optimal resistance. Without brim or support, with 3 perimeters (1.2mm walls) and 1.2mm top/bottom surfaces. 20% tetrahedral infill.
The bracket can be printed with 0.32mm layers, and the grommet with a 0.1mm thickness.
Print a pair of each STL, use M3 20mm hex
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in