UDOO x86 Case with SATA SSD/HDD compartment and fan

**Description**

I made this case to protect my Udoo x86 running as Linux home server. This is my first more complex design I made with the open source software *FreeCAD* (https://www.freecadweb.org/).
There is a compartment for a 63,5 mm ('2,5"') SSD/HDD and a 50x50x15 mm fan should keep the disk and board cool. For better mechanical connections I used insert nuts which I molded into the plastic using an soldering iron.
Currently there are no holes for the GPIO headers beacuse I don't need them right now.

**Used Parts**

*Fan*

1x Fan, DC, axial, 12VDC, 50x50x15mm, 21,93m3/h, 30,1dBA
Manufacturer: SUNON
Model No: ME50151V3-000U-A99
https://www.tme.eu/en/details/me50151v3-a99/dc12v-fans/sunon/me50151v3-000u-a99/

*Fan connector*

To connect the fan to the Udoo board I used the following MOLEX PicoBlade connector and soldered it to the fan wires. The PicoBlade connectors were a bit hard to get, so I've put some order links here too.

1x 3-PIN female Molex PicoBlade C