SD-Card storage (12 cards)

This is a round SD-Card holder. If you turn the bottom, one after the other SD will be lifted, so you can grab it easily.

Turn the rotor counter clock wise, the cards will lift.
Turn the rotor clockwise, the rotor locks to ensure that all cards are fully recessed to close the lid.

Dont turn to fast!! Or you will see flying SD-Cards.

You need an M6 x 35 mm screw, an M6 lock nut and a M6 washer.

Tighten the screw very softly. Keep an eye on the gap between stator and rotor.

The lid