Thingiverse
Team 2551 3D Printed Robot
by dragoty7
8
Downloads
0
Likes
0
Makes
TEAM 2551(PENGUIN EMPIRE) FIRST ROBOTICS POWER UP
This is a 3D model of Team 2551's 2018 robot. It was designed using 3DS Max and printed on an Ultimaker 2 Extended+. The first STL file is the complete robot, but it is recommended that you don't print using that. To print, print each separate part of the robot, which is split up into 8 different STL files. When printing, make sure to use supports, and a brim would be helpful, but is not required. To assemble the pieces, refer to the pictures
This is a 3D model of Team 2551's 2018 robot. It was designed using 3DS Max and printed on an Ultimaker 2 Extended+. The first STL file is the complete robot, but it is recommended that you don't print using that. To print, print each separate part of the robot, which is split up into 8 different STL files. When printing, make sure to use supports, and a brim would be helpful, but is not required. To assemble the pieces, refer to the pictures
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in