Thingiverse
Henry Vacuum Cleaner Hose Adapter
by nerbins
13
Downloads
10
Likes
0
Makes
This is an adapter to allow my old vacuum cleaner hose to fit onto a Henry.
The aim for this project was to be able to use my existing hose without modifying it. I achieved this by creating a flange to push onto the hose and a screw cap to seal onto to vacuum.
The diameter of the screw cap is 62mm, making it an M62x4 thread, with a 35mm hole through the center to allow free rotation.
The flange has a 33.5mm port for the hose (my hose is 33mm in diameter). This allows the hose to push
The aim for this project was to be able to use my existing hose without modifying it. I achieved this by creating a flange to push onto the hose and a screw cap to seal onto to vacuum.
The diameter of the screw cap is 62mm, making it an M62x4 thread, with a 35mm hole through the center to allow free rotation.
The flange has a 33.5mm port for the hose (my hose is 33mm in diameter). This allows the hose to push
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in