Thingiverse
RamboPi
by Darklotus
56
Downloads
28
Likes
0
Makes
Update 04/22/2020
Added STL file RAMBoPi v3_Prusa.stl
I've had multiple requests to trim the mounting tabs so the base can be printed on a Prusa. As requested here is the base with the mounting tabs trimmed 3.5mm on both sides.
Update 06/23/2018
Added a CR-10 3D printer cover. This worked so well on my MPCNC, I decided to make one for my printer. After many hours of use, the cooling of this enclosure works very well. Couple of days it was in the upper 90's in my shop and the enclosur
Added STL file RAMBoPi v3_Prusa.stl
I've had multiple requests to trim the mounting tabs so the base can be printed on a Prusa. As requested here is the base with the mounting tabs trimmed 3.5mm on both sides.
Update 06/23/2018
Added a CR-10 3D printer cover. This worked so well on my MPCNC, I decided to make one for my printer. After many hours of use, the cooling of this enclosure works very well. Couple of days it was in the upper 90's in my shop and the enclosur
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in