Falcon Nine Model Block one

Printed in segments, recommended printing order:

First Stage lower part
First Stage connector
First Stage upper part
Second stage
Payload Fairing (Print 2)
Satellite example


Recommended settings:


Speed: 50 (Speed adjustments for small parts)
Infill density: 3
Infill type: Honeycomb
Supports: No
Raft: No
Brim: No
Material: PLA


NOTE - All parts of this rocket are within a 15 cm x 15 cm x 15 cm area. which is small enough for most commercial printers to make. all my des