Thingiverse
Towel Hanger / Coat Hanger
by Jebela
0
Downloads
0
Likes
0
Makes
Convert STL files to editable STEP files: [stl2stp.com](https://stl2stp.com)
Hello everyone, here is a very simple towel (or coat) hanger I made, the one in our bathroom was broken. I removed the middle section (50mm wide x 55mm high) so you can drill out and place your screws accordingly, I recommend using 3 - 4 to keep it in place. The cap it comes with it .5mm smaller and should fit snug, its only 2mm tall so it shouldn't get in the way of the screw tops. No rafts or supports are needed to
Hello everyone, here is a very simple towel (or coat) hanger I made, the one in our bathroom was broken. I removed the middle section (50mm wide x 55mm high) so you can drill out and place your screws accordingly, I recommend using 3 - 4 to keep it in place. The cap it comes with it .5mm smaller and should fit snug, its only 2mm tall so it shouldn't get in the way of the screw tops. No rafts or supports are needed to
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in