Thingiverse
MTB Handles
by 3D_ThingKing
115
Downloads
114
Likes
0
Makes
New handles for your MTB
The inner rod could be printed in stiff material while the outer should be as soft as you can possibly print.
Myself merged them in Cura and printed both inner and outer as a one piece in same Flex material. This way you can print both in one go but still have control over their separate infills.
Inner rod should be solid and the outer with 20% infill
Then repeat for the handle made for the opposite side of the handlebar
And also if you want to support me ma
The inner rod could be printed in stiff material while the outer should be as soft as you can possibly print.
Myself merged them in Cura and printed both inner and outer as a one piece in same Flex material. This way you can print both in one go but still have control over their separate infills.
Inner rod should be solid and the outer with 20% infill
Then repeat for the handle made for the opposite side of the handlebar
And also if you want to support me ma
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in