Thingiverse
Socket Rail System
by ThingerMaker
84
Downloads
53
Likes
0
Makes
April Versions: I changed to a 1/8" by 1" aluminum as it was more readily available locally.
End caps are smaller for the aluminum as I cleaned up the edges with a belt sander to get rid of the cut marks. They are designed to be a very tight fit. They only protect the sides of workboxes from the end of the aluminum bar, and can be omitted if desired.
Layer Height: 0.4mm
Shell: 2mm
Infill: 50% (Overkill but feels better with a socket on it that the 20% I tried)
Supports: None Needed.
Bu
End caps are smaller for the aluminum as I cleaned up the edges with a belt sander to get rid of the cut marks. They are designed to be a very tight fit. They only protect the sides of workboxes from the end of the aluminum bar, and can be omitted if desired.
Layer Height: 0.4mm
Shell: 2mm
Infill: 50% (Overkill but feels better with a socket on it that the 20% I tried)
Supports: None Needed.
Bu
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in